/proc/cpuinfo

Code:

Bl4ckB0x / # cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 5
model           : 10
model name      : Geode(TM) Integrated Processor by AMD PCS
stepping        : 2
cpu MHz         : 498.070
cache size      : 128 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu de pse tsc msr cx8 sep pge cmov clflush mmx mmxext 3dnowext 3dnow
bogomips        : 997.20
clflush size    : 32
power management:

/proc/interrupts

Code:

Bl4ckB0x / # cat /proc/interrupts
           CPU0
  0:     231773    XT-PIC-XT        timer
  2:          0    XT-PIC-XT        cascade
  3:         77    XT-PIC-XT        serial
  4:       1298    XT-PIC-XT        serial
  5:          0    XT-PIC-XT        CS5535 Audio
  7:          2    XT-PIC-XT        parport0
  9:          0    XT-PIC-XT        acpi
 10:      38541    XT-PIC-XT        eth0
 11:      38164    XT-PIC-XT        ehci_hcd:usb1, ohci_hcd:usb2, eth1
 14:      12238    XT-PIC-XT        pata_cs5536
NMI:          0   Non-maskable interrupts
TRM:          0   Thermal event interrupts
SPU:          0   Spurious interrupts
ERR:          0

/proc/ioports

Code:

Bl4ckB0x / # cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:0f.2
01f0-01f7 : 0000:00:0f.2
  01f0-01f7 : pata_cs5536
0295-0296 : w83627ehf
  0295-0296 : w83627ehf
02f8-02ff : serial
0376-0376 : 0000:00:0f.2
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : 0000:00:0f.2
  03f6-03f6 : pata_cs5536
03f8-03ff : serial
04d0-04d1 : pnp 00:02
0778-077a : parport0
0cf8-0cff : PCI conf1
1000-101f : 0000:00:0f.0
6000-6007 : 0000:00:0f.0
  6000-6007 : CS5536 ACB0
6100-61ff : 0000:00:0f.0
6200-623f : 0000:00:0f.0
9c00-9c3f : 0000:00:0f.0
  9c00-9c03 : ACPI PM1a_EVT_BLK
  9c0c-9c0d : ACPI PM2_CNT_BLK
  9c10-9c13 : ACPI PM_TMR
  9c18-9c1f : ACPI GPE0_BLK
  9c28-9c29 : ACPI PM1a_CNT_BLK
9d00-9d7f : 0000:00:0f.0
9e00-9e07 : 0000:00:01.0
ac1c-ac1f : 0000:00:01.0
fa00-faff : 0000:00:0d.0
  fa00-faff : r8169
fc00-fcff : 0000:00:0c.0
  fc00-fcff : r8169
fe00-fe7f : 0000:00:0f.3
  fe00-fe7f : CS5535 Audio
ff00-ff0f : 0000:00:0f.2
  ff00-ff0f : pata_cs5536

/proc/dma

Code:

Bl4ckB0x / # cat /proc/dma
 4: cascade

/usr/sbin/lspci

Code:

Bl4ckB0x / # /usr/sbin/lspci
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 31)
00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video
00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
00:0e.0 Ethernet controller: Atheros Communications Inc. AR5413 802.11abg NIC (rev 01)
00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03)
00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01)
00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01)
00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02)
00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02)
00:0f.6 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UDC (rev 02)
00:0f.7 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UOC (rev 02)

/usr/sbin/lspci -vvv

Code:

Bl4ckB0x / # /usr/sbin/lspci -vvv
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 31)
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 248, Cache Line Size: 32 bytes
        Region 0: I/O ports at ac1c [size=4]
        Region 1: I/O ports at 9e00 [size=8]

00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video (prog-if 00 [VGA controller])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at effe4000 (32-bit, non-prefetchable) [size=16K]
        Region 2: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
        Region 3: Memory at efff0000 (32-bit, non-prefetchable) [size=16K]
        Region 4: Memory at effec000 (32-bit, non-prefetchable) [size=16K]
        Kernel driver in use: lxfb

00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at effe8000 (32-bit, non-prefetchable) [size=16K]
        Kernel driver in use: Geode LX AES

00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
        Subsystem: JAPAN Computer Industry Inc Device 3001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at fc00 [size=256]
        Region 1: Memory at effff000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: r8169

00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
        Subsystem: JAPAN Computer Industry Inc Device 3001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at fa00 [size=256]
        Region 1: Memory at efffe000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: r8169

00:0e.0 Ethernet controller: Atheros Communications Inc. AR5413 802.11abg NIC (rev 01)
        Subsystem: Z-Com, Inc. Device 0050
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 8 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at effd0000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
        Kernel modules: ath_pci

00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03)
        Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Region 0: I/O ports at 6000 [size=8]
        Region 1: I/O ports at 6100 [size=256]
        Region 2: I/O ports at 6200 [size=64]
        Region 3: I/O ports at 1000 [size=32]
        Region 4: I/O ports at 9d00 [size=128]
        Region 5: I/O ports at 9c00 [size=64]

00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) (prog-if 80 [Master])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 248, Cache Line Size: 32 bytes
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        Region 4: I/O ports at ff00 [size=16]
        Kernel driver in use: pata_cs5536

00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01)
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 5
        Region 0: I/O ports at fe00 [size=128]
        Kernel driver in use: cs5535audio

00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) (prog-if 10 [OHCI])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin D routed to IRQ 11
        Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ohci_hcd

00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) (prog-if 20 [EHCI])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin D routed to IRQ 11
        Region 0: Memory at efffc000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ehci_hcd

00:0f.6 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UDC (rev 02) (prog-if fe [USB Device])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin D routed to IRQ 11
        Region 0: Memory at efff8000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.7 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UOC (rev 02) (prog-if 80 [Unspecified])
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-         Interrupt: pin D routed to IRQ 11
        Region 0: Memory at efffb000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

/usr/sbin/lsusb

Code:

Bl4ckB0x / # /usr/sbin/lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/usr/sbin/lsusb -vvv

Code:

Bl4ckB0x / # /usr/sbin/lsusb -vvv

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.26-gentoo-r1 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:0f.5
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.26-gentoo-r1 ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:0f.4
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             4
  wHubCharacteristic 0x0002
    No power switching (usb 1.0)
    Ganged overcurrent protection
  bPwrOn2PwrGood        3 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

/sbin/hdparm

Code:

Bl4ckB0x / # /sbin/hdparm -tT /dev/sda

/dev/sda:
 Timing cached reads:   430 MB in  2.00 seconds = 214.77 MB/sec
 Timing buffered disk reads:  158 MB in  3.01 seconds =  52.44 MB/sec

/bin/dmesg

Code:

Bl4ckB0x / # /bin/dmesg
Linux version 2.6.26-gentoo-r1 (root@Bl4ckB0x) (gcc version 4.3.1 (Gentoo 4.3.1-r1 p1.1) ) #5 Sat Oct 4 23:44:38 CEST 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
 BIOS-e820: 000000003f7b0000 - 000000003f7b3000 (ACPI NVS)
 BIOS-e820: 000000003f7b3000 - 000000003f7c0000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1015MB LOWMEM available.
Entering add_active_range(0, 0, 260016) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   260016
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   260016
On node 0 totalpages: 260016
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 2000 pages used for memmap
  Normal zone: 253920 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: RSDP 000F5E30, 0014 (r0 AMDGX3)
ACPI: RSDT 3F7B3000, 0028 (r1 AMDGX3 AWRDACPI 42302E31 AWRD        0)
ACPI: FACP 3F7B3080, 0074 (r1 AMDGX3 AWRDACPI 42302E31 AWRD        0)
ACPI: DSDT 3F7B3100, 2C30 (r1 AMDGX3 AWRDACPI     1000 MSFT  3000000)
ACPI: FACS 3F7B0000, 0040
Allocating PCI resources starting at 40000000 (gap: 3f7c0000:c0830000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257984
Kernel command line: root=/dev/sda2 video=lxfb:1024x768-32@60 parport=0x378,7
Initializing CPU#0
CPU 0 irqstacks, hard=b039c000 soft=b039b000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 498.054 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1027868k/1040064k available (1982k kernel code, 11704k reserved, 520k data, 148k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffff6000 - 0xfffff000   (  36 kB)
    vmalloc : 0xf0000000 - 0xffff4000   ( 255 MB)
    lowmem  : 0xb0000000 - 0xef7b0000   (1015 MB)
      .init : 0xb0373000 - 0xb0398000   ( 148 kB)
      .data : 0xb02efbcd - 0xb0371e08   ( 520 kB)
      .text : 0xb0100000 - 0xb02efbcd   (1982 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 997.20 BogoMIPS (lpj=4986024)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080321
ACPI: setting ELCR to 0200 (from 0c20)
net_namespace: 480 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfaaf0, last bus=0
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x3f7b0000-0x3f7bffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x3f7affff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
IPv4 FIB: Using LC-trie version 0.408
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Switched to high resolution mode on CPU 0
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
SGI XFS with security attributes, no debug enabled
msgmni has been set to 2007
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:00:01.1: Boot video device
AMD Geode RNG detected
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
lxfb 0000:00:01.1: 8192 KB of video memory at 0xee000000
Console: switching to colour frame buffer device 128x48
fb0: Geode LX frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
PPP generic driver version 2.4.2
NET: Registered protocol family 24
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
eth0: RTL8169sc/8110sc at 0xf000a000, 00:0f:c9:03:5e:52, XID 18000000 IRQ 10
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
eth1: RTL8169sc/8110sc at 0xf000c000, 00:0f:c9:03:5e:53, XID 18000000 IRQ 11
Driver 'sd' needs updating - please use bus_type methods
scsi0 : pata_cs5536
scsi1 : pata_cs5536
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: DUMMY
ata1.00: ATA-8: Hitachi HTS723232L9A360, FC4OC30F, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72323 FC4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:0f.5[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0f.5 to 64
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 11, io mem 0xefffc000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:0f.4[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0f.4 to 64
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 11, io mem 0xefffd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: PC Speaker as /devices/platform/pcspkr/input/input0
i2c /dev entries driver
w83627ehf: Found W83627EHG chip at 0x290
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
ACPI: PCI Interrupt 0000:00:01.2[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
geode-aes: GEODE AES engine enabled.
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.16.
Error: Driver 'pcspkr' is already registered, aborting...
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.3[b] -> [/b]Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:0f.3 to 64
ALSA device list:
  #0: CS5535 Audio cs5535audio at 0xfe00, irq 5
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear 
All bugs added by David S. Miller 
Using IPI Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with journal data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 148k freed
EXT3 FS on sda2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with journal data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with journal data mode.
XFS mounting filesystem sda7
Ending clean XFS mount for filesystem: sda7
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with journal data mode.
XFS mounting filesystem sda9
Ending clean XFS mount for filesystem: sda9
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with journal data mode.
r8169: eth0: link up
r8169: eth1: link up
Adding 248968k swap on /dev/sda11.  Priority:-1 extents:1 across:248968k